Corrosion and Scale Inhibitor Has Scale Removal Efficiency

The corrosion and scale inhibitor has scale removal efficiency

Some customers are not very familiar with our corrosion and scale inhibitors. They dont know what its for. In fact, corrosion and scale inhibitor is a common scale inhibitor and dispersant. It has brought us a very good guarantee for our life. In the following content, we will make a detailed introduction.

Corrosion and Scale Inhibitor Has Scale Removal Efficiency

Corrosion and scale inhibitor is a kind of reagent with unique performance. It is characterized by adsorption and desorption. The corrosion and scale inhibitors supplied by us not only have the properties of fixing particles and adsorption of water stabilizer, but also have the function of desorbing solid particles. Because of this, our products have been sold by new and old customers.

Corrosion and scale inhibitor as our companys main production of a product, its use effect is very good. Our company in the production of this product for all aspects have very strict requirements. The corrosion and scale inhibitor has scale removal efficiency and can remove the existing scale after long-term use. Effective control of carbonate, silicate, sulfate, sulfate scaling.

The above content is our introduction of corrosion and scale inhibitors. If you have a demand for our products, you can come to our company for purchase at any time.

What should be paid attention to when using corrosion and scale inhibitors?

Corrosion and scale inhibitors can be used in boilers. This can better ensure that our boiler is clean. What should be paid attention to when using corrosion and scale inhibitors?

When corrosion and scale inhibitors are used, the interior of the boiler must be cleaned. This work must have the regular specialized personnel to carry on the completion. In this way, we can better achieve the practical effect. If the water inside the boiler is very much, we must prevent the phenomenon of pipe blockage. Therefore, flushing should be carried out when pressing the fire and stopping the boiler. At the same time, pay attention to the water level. Therefore, when not in use, the corrosion and scale inhibitors should be placed in a dry place to maintain ventilation and not be exposed to direct sunlight or rain.

2020-07-30T08:00:19+00:00 July 30th, 2020|Tags: |